Window and Door Installations Screws
When installing windows and doors, choosing the right products and screws for the installations are paramount. Ensuring you have the correct and proper anchoring and stability with each fixture is a must.
So whether you are installing UPVC or aluminum frames hopefully we can make the daunting process of having the right screws a little easier.
For a full range of what we sell please visit here. However we will highlight a select few products for your installations.
Important things to consider
Size of your window: To know which screw sizes will suit your project, it is important to measure the window dimensions correctly and also make note of any additional weight requirements which could impact which screw you purchase.
Screw materials: Self tapping screws can make installations on UPVC or aluminum easier due to the fact they are self drilling with sharp tips. Also think about corrosion when choosing your screws, if your installation will have all the elements beating down on it, then you don't want a rusty screw!
Screw Sizings: When choosing the right screw make sure that you have your measurements spot on, choose a length for correct anchoring, making sure it is going enough into the frame to keep it secured, without going too deep. Also make sure you choose a diameter to keep the structural integrity.
Depending on the material of the window frame, different screws are required. If the frame is made of wood, the screws have small heads; for aluminium or plastic window frames, screws with countersunk heads are recommended.
Note: These window screws are also suitable for fixing door frames.
We always recommend screws being used over nails. Screws are far more strong and durable and will prevent frames from moving over time. Nails will effect the strength of your frame causing instability and possible damage. In terms of the installation process, screws can be easily installed, adjusted and removed. Nails may be easy going in, but in terms of adjustment or removal that's a different story.
So let's have a look at some of the products we will sell for your window installations. The full range can be visited here.
Baypole Screws
Wafer Flange - Self Drilling
Specifically designed for joining of PVCu bay window sections, but frequently used for other window and door fabrication purposes.
Self Drilling and Self Tapping with a V-Flute design at the tip of the screw.
Available in multiple lengths.
Cill Screws
Self-Tapping Thread and Self-Drilling Point
Used for attaching cills to the base of door or window frames
The self-drilling point permits the screw to drill through both reinforced and unreinforced frames
Available in multiple lengths.
Rhino Screws
Concrete Frame Screws
Used mainly for window and door frames but also versatile for joinery, electrical and plumbing applications
Designed for fixing to Concrete, Brick, Stone, Block and Wood.
A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood.
This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.
Hi-Lo Thread - 30mm hi-lo starting thread for rapid installation and debris removal whilst offering a safe and secure fixing into most substrates
Zinc and Yellow Passivated for extra protection against corrosion
Available in multiple lengths and diameters.
Rainwater Screws
Low Profile
Specifically designed for the fitting of brackets and clips during installation of PVCu rainwater systems.
Single slash on 25mm+ to reduce torque and the likelihood of splitting when the screw is inserted close to the edge
We also stock a range of fabrication screws used for connecting various sections of your window installations. Before purchasing any screws make sure you are picking the right screw for the right job. There are specialist screws for connecting brackets or connecting non aluminium/ steel parts or for connecting steel hinges etc where extra weight is needed.
So make sure you check what you are connecting or you may end up using an inferior screw, that isn’t quite right for the job.
You can view our whole range here but let’s take a look at a select few.
Window Fabrication Screws with Ribs - Gimlet Point
Multiple uses for fitting a variety of hardware to frames where there is no steel or aluminium reinforcement present. Find out more information about this screw by clicking available to purchase here above.
Window Fabrication Screws - Friction Stay - Gimlet Point
For attaching friction stays with countersunk holes to PVCu frames. Find out more information about this screw by clicking available to purchase here above.
Window Fabrication Screws - Self-Tapping
Multiple uses for fitting a variety of hardware to frames where there is a steel or aluminium reinforcement present. Find out more information about this screw by clicking available to purchase here above.
Window Fabrication Screws - Hi-Lo Thread
Multiple uses for fitting a variety of hardware to frames where there is no steel or aluminium reinforcement present. Find out more information about this screw by clicking available to purchase here above.
Window Fabrication Screws - Friction Stay
For attaching friction stays with countersunk holes to steel reinforced PVCu frames. Find out more information about this screw by clicking available to purchase here above.
Soudafoam Window & Door Foam
Professional filling around PVCu, aluminium and wooden windows and doors. POLYURETHANE expanding foam filler. Window & door filling formulation with high linear expansion
Fill and Fix Expanding PU Foam
Expanding foam that is based on a moisture curing polyurethane pre-polymer. Quick, economic and easy to apply. Improves draught and heat insulation, fills irregular gaps, fixes framework and deadens sound.
Silicone Lubricant
Lubricant is specifically formulated for long lasting, low odour and non-staining lubrication of plastic, vinyl and rubber materials and components. Ideal for Window seals and slides, runners, bearings, O-rings, textile equipment and more.
Slirub LMN
Low modulus neutral cure silicone sealant. Very fast skinning time and final cure, thick-bodied and excellent tolerability. Primerless adhesion on all common construction materials (glass, plastics, masonry substrates, metals and wood).
Firecrl - Fire Resistant Acrylic Sealant
-
For use in passive fire protection systems as joint sealant or filler; installation of fire retardant window and door frames, fire retardant connection joints, penetration seals and internal garages. Fire-retardant filling of cracks in concrete and plasterwork. It also resists the passage of fire and smoke
Gap Filler Foam
Ideal for general filling and insulating of holes, voids, gaps and joints in most construction applications. Adheres to most building materials. Can also be used around window and door frames and Insulation of pipes etc.
WP70 Oxime Silicone
A low modulus neutral cure silicone for perimeter sealing of external door and window frames inc Wood, aluminium & uPVC, for weather sealing and flexible jointing of infill panels. Check out the full range of foams and sealants we have here.
We also stock a range of accessories that can help with installations such as:
Assorted Horseshoe Shims
Assorted horseshoe shims, packed in 200's containing the 6 most common sizes. Used for easy and quick levelling of battens, dry lining systems, stud work, door and window frames.
Air Wedge
A strong inflatable air bag that saves time during the fixing and levelling of internal doors, door frames, double glazed windows and external door frames. Simply place frame into position, slide the deflated wedge into gap and inflate gently, trapping the frame in position allowing fixings to be installed.
